Bell pepper flowpacking with a singulator and AI robots

At a fresh produce packer in the Netherlands, robots from TOS Robotics pack bell peppers for flowpacks. A singulator puts the loose peppers in single file. Robots with AI control pick each pepper from the moving belt and place it on the infeed of the flowpacker. The line runs in production and does the work that people did by hand.

Request a demo
Customer
Fresh produce packer in the Netherlands
Product
Bell peppers for flowpack
Robots
Two FANUC arms with TOS AI control
Status
In production

Filling a flowpacker with bell peppers is repetitive handwork at a high pace, and it is hard to staff. Two robots now do it.

How the cell works

  1. The peppers arrive in bulk. The singulator puts them one behind the other.

  2. They travel one by one through a tunnel to the robots.

  3. 3D cameras capture the shape and position of every pepper.

  4. The robot follows the belt and picks without the belt stopping.

  5. Each pepper goes on the infeed of the flowpacker, in the position the pack needs.

  6. The flowpacker seals the pack as before. Nothing changes in the packing machine.

The whole cell at 40 picks per minute

One uncut minute from the camera above the cell. Recorded on 2 October 2026.

One minute from the camera above the cell: both robots pick bell peppers from the singulators and fill the infeed at 40 picks per minute each.

Two robots at the flowpacker

The cell stands in the customer's packing hall, behind the singulators. The cell, the gripper and the control were designed by TOS Robotics.

The robots keep getting better after go-live. In the first weeks the pick accuracy was 97.6%. By weeks seven and eight it was 99.1%.

Two yellow robot arms with the TOS logo at the bell pepper line, with the singulators behind them and peppers on the belt.

The line on film

Recorded on the production floor.

The film of TOS Robotics about the bell pepper line: the tunnel, teaching with the Teachbot, picking with AI, quality control and the results.

The next bell pepper line

A render of the next line, with TOS Robot arms in three cells. The flowpacking cell page explains how it works.

Render of the next bell pepper line: crate tippers, three cells with TOS Robot arms over heaps of red, yellow and green bell peppers, and the flowpacker at the end.

Performance

40
picks per minute, per robot
99.1%
pick accuracy, up from 97.6% in the first weeks after go-live
99.3%
robot uptime
2.3M+
robot cycles in production

Questions and answers

Can a robot pack bell peppers for flowpack?

Yes. In production in the Netherlands, robots from TOS Robotics pick bell peppers from a moving belt and place them on the infeed of a flowpacker, at 40 picks per minute per robot. The robots handle the differences in shape and size with 3D cameras and AI.

What does the singulator do?

Bell peppers arrive in bulk. The singulator separates them and puts them one behind the other on V-shaped belts. That gives the robot one pepper at a time with space around it.

Which robots are used on this line?

The line uses FANUC industrial robot arms with the AI control of TOS Robotics.

Can I see the line?

Ask TOS Robotics for a demo. We can show footage, the digital twin of the line and, in consultation with the customer, the line itself.

See it run on your product

Send us your product and your packing format. We show you what the robot does with it, in simulation or on our test cell in Vught.

Request a demo