# How long does it take to teach a robot a new product?

How long it takes to teach a robot a new product depends on the method and on how much the task varies. Classic programming takes days to weeks. In a pilot of TOS Robotics at a packer, a task that used to take weeks of programming was taught with the Teachbot in one day.

Source: https://tosrobotics.com/knowledge/how-long-to-teach-a-robot/
Last updated: 2026-11-15

## Three methods, three time scales

| Method | How | Typical time |
|---|---|---|
| Programming with a teach pendant | An engineer jogs the robot to each point with buttons, stores it and writes the logic | Days for a simple task, weeks for a complex one |
| Demonstration of a fixed path | A person guides the robot through the movement once by hand and the robot repeats it | Minutes to hours |
| Demonstrations for an AI model | A person performs the task many times on real products and a model learns from the recordings | Recording, training and testing. One day for one task in a TOS Robotics pilot |

## What decides the time

- **Variation.** A task that is the same every time needs one demonstration. A task on natural products needs examples that cover the spread of the product, including the odd ones.
- **Required precision.** A place in a wide crate is easier than a place in a tight tray pocket.
- **The gripper.** A new product sometimes needs another gripper. That is mechanical work with its own lead time.
- **Testing.** Each method needs a test on real products before production starts. Plan it in.

## Teaching with the Teachbot

With a teach pendant, a programmer builds the movement from stored points and rules. TOS Robotics engineers teach with the [Teachbot](https://tosrobotics.com/products/teachbot/) instead, a light scale model of the robot arm with a sensor in every joint. The engineer makes the whole movement by hand at normal speed, the robot follows with 12 milliseconds of delay, and the recording includes the speed and timing of the movement. An AI model then learns the task from those recordings, so no pick positions are programmed.

## Keeping it short

The robot copies what it is shown, so the demonstrations must be careful and use real products, including the odd ones. Change one thing at a time, first the new product and then the new pack, so a problem can be traced to one change. Keep the recordings, because they can be reused when the task changes again.

A shorter teaching time makes automation easier to justify for short runs and frequent product changes. That is where [imitation learning](https://tosrobotics.com/knowledge/what-is-imitation-learning/) fits.

## Keep reading

- [Teachbot: teach a robot by hand](https://tosrobotics.com/products/teachbot/): A teaching tool. Guide it by hand and the robot follows. Sold on its own.
- [What is imitation learning for robots, and when does it fit?](https://tosrobotics.com/knowledge/what-is-imitation-learning/): Teaching a robot by showing it the task, used by TOS Robotics on a bell pepper line at 40 picks per minute per robot.

## Questions and answers

### Who teaches the robot?

TOS Robotics engineers do, on your product, at the TOS Robotics test cell or at your line. You do not need a robot programmer.

### Does a small change mean teaching everything again?

Usually not. A fixed path is recorded again. For an AI model, demonstrations of the new situation are added to the existing ones and the model is trained again.
