# How to automate flowpacking of fresh produce

Automating flowpacking of fresh produce means automating the feeding of the flowpacker, the step that is still handwork in many packing stations. TOS Robotics does this in three steps: singulating the products, seeing and picking each one whatever its shape, and placing it on the moving infeed.

Source: https://tosrobotics.com/knowledge/automate-flowpacking-fresh-produce/
Last updated: 2026-11-15

## What a flowpacker does

A flowpacker forms a tube of film around the products on its infeed, seals the tube and cuts it into packs. It does not put the products on the infeed. The infeed has pockets or pushers at a fixed distance, and each pocket must get the right number of products, in the right order and direction. With fresh produce that filling is often done by hand. Along a bell pepper line people take peppers from a bulk stream and lay them in the pockets, for a mixed pack for example one red and one yellow.

## The three steps

**Singulate.** A robot needs one product at a time. A singulator separates the bulk product and puts it in single file with space between the products, for example on V-shaped belts.

**See and pick.** Natural products differ in shape and size, so a fixed gripper at a fixed position can miss. There are three options.

| Approach | Works when | Limit |
|---|---|---|
| Mechanical feeder without robot | Product is uniform and robust | Hard with mixed colours or fragile products |
| Robot with rule-based vision | Product shape is simple and constant | A new product needs new rules and tuning |
| Robot with a learned AI model | Product varies in shape and size | Needs demonstrations on real products |

TOS Robotics uses the third approach. Its engineers demonstrate the task on real products and the model learns from those demonstrations, see [picking and placing AI models](https://tosrobotics.com/products/picking-and-placing-ai-models/).

**Place on the moving infeed.** The infeed of a flowpacker keeps moving, so the robot follows the pocket and places the product while both move. This is called line tracking. For mixed packs the robot also keeps the colour order.

## What to check before you start

- **Line speed.** The products per minute the flowpacker needs, divided by the picks per minute of one robot, gives a first estimate of the number of robots.
- **Product spread.** Sizes, shapes and colours through the season.
- **Packing formats.** Per piece, per two, per three, mixed colours.
- **Space.** The length available in front of the flowpacker.
- **Quality.** Whether a check on each product should be part of the cell.

## A working example

At a packer in the Netherlands, TOS Robotics robots pick bell peppers from a singulator and place them on the infeed of a flowpacker in production. Read the case [bell pepper flowpacking with a singulator](https://tosrobotics.com/cases/bell-pepper-flowpacking-singulator/).

## Keep reading

- [Bell pepper flowpacking with a singulator and AI robots](https://tosrobotics.com/cases/bell-pepper-flowpacking-singulator/): Robots fill the flowpacker, where people used to stand.
- [Flowpacking cell: robots that fill the flowpacker](https://tosrobotics.com/products/flowpacking-cell/): A complete cell that fills the flowpacker. €150,000 per cell. In production.

## Questions and answers

### Do I need a new flowpacker to automate?

Usually not. A robot cell is placed in front of the existing flowpacker and fills its infeed. The packing machine stays as it is.

### Which products are suitable?

Products that are packed per piece or per few pieces. TOS Robotics packs bell peppers this way in production. Cells for avocados and mangos are ready for deployment.
